How to Fit and Replace the iTank 2 Protector on Your Tank
By vaporesso | Published: 2026-11-03
Category: ハウツーガイド
Learn how to install, check, and replace the iTank 2 Protector step by step. Keep your tank glass protected and avoid common fitting mistakes.
Quick answer
To fit the iTank 2 Protector, slide the TPU sleeve over the glass tube before reinstalling the tank, then check that it sits evenly with no trapped debris. Replace it when it feels loose, torn, or stretched.
Why the protector matters more than it looks
The iTank 2 Protector is a TPU sleeve that sits around the glass tube. Its job is simple: absorb minor knocks and reduce the chance of cracks during everyday handling. It does not make the glass unbreakable, and it will not fix a cracked tube.
Because TPU is flexible, the fit can loosen over time or after repeated removal. A protector that slides too easily is not doing its job. Check the fit each time you clean the tank.
When to replace instead of refit
Refit the protector if it is intact but sitting unevenly. Replace it if you see tears, stretched edges, or a loose fit that no longer stays in place. A damaged protector can trap e-liquid or debris against the glass, so replacement is the safer choice.
Color and size options are available, but the catalog does not list exact dimensions for each size. If you are unsure which size fits your tank, check the product options before ordering rather than guessing.
Step-by-step: fit and replace the iTank 2 Protector
- Remove the tank and empty it: Unscrew the tank from your mod and empty any e-liquid before handling the glass. Work over a soft surface such as a towel so a dropped tank does not crack. Never fit or remove the protector while the tank is attached and filled.
- Take off the old protector: Slide the old TPU sleeve off the glass tube. If it is stuck, ease it off with your fingers rather than pulling hard or using tools that could scratch the glass. If the old protector tears during removal, check the glass for cracks before continuing.
- Clean and dry the glass: Wipe the glass tube with a soft cloth and let it dry completely. Any e-liquid residue or lint left on the glass can make the new protector slide or sit unevenly. A dry, clean glass surface is the checkpoint before fitting.
- Slide on the new protector: Work the new iTank 2 Protector over the glass tube from one end, easing it on evenly. Do not stretch it more than needed, and make sure it covers the area you want protected without blocking the tank threads. The protector should sit flat with no twisted edges or trapped air pockets.
- Reassemble and check the fit: Reinstall the glass and tank parts, fill with e-liquid, and reassemble on your mod. Check that the protector stays in place and does not interfere with the tank connection or airflow. If the protector moves when you handle the tank, remove it and refit before vaping.
Product facts
- iTank 2 Protector (1Pcs): Made from TPU material to help keep the iTank glass tube from cracking or breaking during everyday use. TPU adds a cushioning layer, so the protector is worth fitting before the tank sees daily pocket or bag wear.
iTank 2 Protector (1Pcs)
